Instant fix concrete surfaces

توضیحات

The external sealant of the tank with quick setting properties

Description:

Among the serious damages to the structures is the occurrence of cracks and seams in the concrete sections, which mainly lead to the penetration of water or any other fluid into the structure. Based on this, the instant waterproofing material called GRANASIL AN10 is a type of instant waterproofing mortar based on Portland cement modified with waterproofing and quick-setting and quick-hardening materials, which is mixed with water and used to seal and fix leaks, seams and cracks. It is used on cement and concrete surfaces and holes. This product has a high reaction rate of hydration and its setting speed is about 1 to 3 minutes at 20 degrees Celsius.

Physical and chemical state:

Properties and effect:

– High initial grip – Very high initial resistance – No cracks caused by thermal shrinkage – It has no toxic elements and can be used in contact with drinking water – High adhesion to cement surfaces

Maintenance:

The above product can be stored for 6 months.

instructions:

Preparation of the desired joint or gap is mechanically split until it reaches a solid surface (open it in a V shape). Surface pollution should be washed completely with water. Pour this powder and water in a ratio of 1 to 5 so that a hard and homogeneous paste is formed in a suitable container and mix with hand or trowel and quickly make it uniform. to be consumed and consumed in less than 20 seconds, press the prepared mixture on the leakage area, fill the seams from the surrounding to the center of the leakage, after filling the leakage, level it with concrete or stone. For those where there is a lot of pressure, use a narrow pipe for drainage and then fix the leakage around it with an instant stopper, cut the bottom of the pipe and seal the body in the above way. Attention – Warm air makes the mortar set faster and cold air slows it down. In cold weather, bring the temperature of the water to 20 degrees Celsius, then prepare the mortar. The best way to mix instant powder with water is to use your hand (glove). – The use of less and more than the permitted range of this additive or the simultaneous use of multiple concrete additives must be done with the permission of the experts of the technical department of Granabton Chemical Industries Company.

Application:

It is used for immediate sealing and stopping of any leaks in the place of seams and water passages of concrete structures such as tunnels, dams, reservoirs, pipes and canals. Creating compressive, bending and adhesion resistance, along with durability and chemical and structural stability against environmental factors Fast clamping and blocking of leakage sections in the area with water and in all types of water structures and similar hydraulic structures Protection and sealing and immediate shutdown, any water leakage in tunnels, dams and water tanks, elevator shafts and pools.

packaging method:

The above product is supplied in 20 kg bags.

Safety items:

This material is alkaline, so gloves, glasses, and work clothes should be used during implementation